Metal roofing specialists · Tampa Bay since 1994
FL Lic. #CCC1326031
Mon–Sat 7am–7pm · Storm response 24/7
Roofing & sheet metal contractor in
Tampa Bay
and the Gulf Coast
We fabricate and install standing seam, 5V crimp, aluminum, and metal tile roof systems engineered for 150+ mph wind loads and salt-air exposure. Three decades of sheet metal work across Tampa Bay — from waterfront residences to distribution centers.
30+ years
In-house fabrication
180 mph tested
Free inspections
Free on-roof inspection
Written estimate the same week — no pressure, no subcontracted crews.
01 — A contractor that makes its own metal
Three decades of sheet metal, not a sales office.
Panel profile drives performance, price, and how the roof reads from the street. We fabricate flashing, coping, valley, and fascia details in our own shop — cut to your roof, not ordered close enough — and we install them with our own crews.
In-house brake and roll-forming shop
Panels roll-formed to length and custom trim bent to your drawings — no waiting on a distributor.
Engineered for Florida wind zones
Concealed-clip assemblies with Florida Product Approval and Miami-Dade NOA options, fastened to your exact zone.
Salt-air specification, not guesswork
Within three miles of open water we specify aluminum, not steel — a 45-year roof instead of rust in eight.
Deck repair priced before we install it
Two sheathing boards are included in every estimate. Anything more is photographed and quoted at $120 each first.
We are local
A local shop Tampa Bay homeowners and builders trust
1994
Fabricating in Tampa since
180 mph
Tested uplift ratings
40–70 yr
Expected system life
10 systems
Metal, shingle & tile
“They measured the roof, photographed the deck, and the number on the final invoice was the number on the estimate. The crew was Premier’s own people — same faces, start to finish.”
Waterfront residence · Clearwater, Pinellas County
Our time-tested process
Four steps from inspection to final walkthrough
Step 01
Inspection & measure
On-roof assessment with photo documentation, deck condition, and drainage review. Free, no obligation.
Step 02
System & finish selection
Panel profile, gauge, and Kynar color chosen against your budget, exposure, and HOA requirements.
Step 03
Permit & fabrication
We pull the county or city permit and roll-form your panels to length in our own shop.
Step 04
Install & inspection
Dry-in, underlayment, panels, and trim — then final county inspection and your warranty documents.
02 — Roofing systems
Every roof system we fabricate and install
Panel profile drives performance, price, and how the roof reads from the street. Compare the six systems we build, then get a number on your own roof in under a minute.
Standing Seam
Concealed-fastener panels with raised seams. The architectural standard and our most-specified system.
$10.80 / sq ft
Details →
5V Crimp
The classic Florida metal roof. Exposed fastener, fast to install, unmistakably Gulf Coast.
$8.10 / sq ft
Details →
PBR Exposed Fastener
Ribbed and corrugated panels for agricultural, industrial, and large-span commercial roofs.
$9.45 / sq ft
Details →
Aluminum — Coastal
The coastal specification. Aluminum will not rust, at any distance from the water.
$14.85 / sq ft
Details →
Metal Tile
Stamped panels that read as barrel tile or shake at a fraction of the weight.
$22.95 / sq ft
Details →
Custom Sheet Metal
Flashing, coping, fascia, and gutter fabricated in our own shop to your drawings.
Quoted by drawing
Details →
Standard roof options
Metal is not the right answer on every building or every budget. We install asphalt shingle and genuine concrete or clay tile with the same underlayment and flashing detail we put under a metal roof.
20-Year Shingle
$5.06 / sq ft
30-Year Shingle
$5.40 / sq ft
50-Year Shingle
$8.44 / sq ft
Tile Roof
$14–$22 / sq ft
03 — Why metal in Florida
A shingle roof is a 15-year decision. Metal is a last-roof decision.
Tampa Bay puts roofs through UV, humidity, salt aerosol, and named-storm wind loads in the same year. Metal is the only assembly that answers all four — and the only one insurers routinely discount.
Wind uplift, engineered
Concealed-clip standing seam assemblies with Florida Product Approval and Miami-Dade NOA options, fastened to spec for your exact wind zone.
Insurance leverage
A new roof with a current wind mitigation inspection is the single largest premium credit available to most Florida homeowners.
Salt-air specification
Within three miles of open water we specify aluminum, not steel — the difference between a 45-year roof and rust at the panel edges in eight.
Cooler attics
High-reflectance Kynar finishes cut peak attic temperatures substantially versus dark shingle, easing summer cooling load.
We make the metal
Our own brake and roll-forming shop means custom flashing, coping, and valley details are fabricated to your roof, not ordered close enough.
No surprise deck bills
Two sheathing boards are included in every estimate. Additional boards are documented with photos and billed at $120 each, before installation.
Proudly serving
Metal roof crews across Hillsborough, Pinellas & Pasco
Permitting, wind zones, and coastal exposure differ by jurisdiction. Pick your city for local requirements and recent work.
Tampa
Hillsborough County
St. Petersburg
Pinellas County
Clearwater
Pinellas County
Brandon
Hillsborough County
Riverview
Hillsborough County
Wesley Chapel
Pasco County
Largo
Pinellas County
Plant City
Hillsborough County
04 — Questions
Metal roofing, answered straight
What does a metal roof cost in Tampa?
Most Tampa Bay residential metal roofs land between $11 and $26 per square foot installed, depending on panel system, alloy, and roof complexity. A 2,200 sq ft roof in 5V crimp runs roughly $28,000–$36,000; the same roof in 24ga standing seam runs roughly $40,000–$55,000. Use the estimator for a number on your specific roof.
Will a metal roof lower my insurance premium?
How long does a metal roof last in Florida?
Is a metal roof loud in the rain?
Can you install metal over my existing shingles?
How long does installation take?
Do you handle insurance and storm damage claims?
Measured.
Fabricated.
Installed.
Free on-roof inspection, written estimate the same week. Whether it’s one waterfront home or a portfolio of buildings, we measure, photograph, and price it properly — no pressure, no subcontracted crews.
Mon–Sat 7am–7pm · Storm response 24/7